EXPERT TECHNICAL ADVICE:

V-SEAL® Warranty

V-SEAL® 101 and V-SEAL® 102 brand products are warranted to be manufactured of the highest quality raw materials and are manufactured under strict conditions of quality. V-SEAL® 101 and V-SEAL® 102 brand products are warranted to contain the ingredients specified on the label at the time of manufacture.

 

V-SEAL® 101 and V-SEAL® 102 contain a proprietary siliconate formula – a chemically reactive ingredient documented to form a cross-linked internal membrane barrier within porous surfaces such as concrete, brick and stone. This barrier will wear away only when the substrate itself wears away below the lowest penetration of the sealer – 20 years or more under conditions of normal wear. Under certain conditions additional treatments may be required. Substrates properly sealed with siliconate become stronger, more moisture repellent, more resistant to stains, and more resistant to dusting.

 

V-SEAL® specifically does not warranty the performance of products manufactured by others. V-SEAL® specifically does not warranty product application methods. V-SEAL® recommends small area testing prior to application. Based upon this test the purchaser or applicator shall determine for themselves the suitability of the product for the intended use.  V-SEAL® shall not be liable for any injury, loss, or damage, direct or consequential, resulting from the use is its products. Any warranty by V-SEAL® is limited to the replacement of product for specified areas.