ATG CounterTek Countertop Kits (formerly StoneLok E3/2K2)

40 ft.2 Kit - 28 ml W-O/S, 16 oz ATG CounterTek Epoxy Gen 3 Kit, 12 oz ATG CounterTek 2K Pro 2 Kit
80 ft.2 Kit - 28 ml W-O/S, 1 Quart ATG CounterTek Epoxy Gen 3 Kit, 2 x 12 oz ATG CounterTek 2K Pro 2 Kits
150 ft.2 Kit - 112 ml W-O/S, 2 x Quart ATG CounterTek Epoxy Gen 3 Kits, 48 oz ATG CounterTek 2K Pro 2 Kit
400 ft.2 Kit - 234 ml W-O/S, 1 Gallon ATG CounterTek Epoxy Gen 3 Kit, 1 Quart ATG CounterTek Epoxy Gen 3 Kit, 1 Gallon ATG CounterTek 2K Pro 2 Kit

Application tools are not included in the kit, so you will need either a sprayer or a roller and roller covers to apply the coatings. If rolling, we typically recommend nap roller covers that are 1/4“ - 3/8“. Foam rollers have a tendency to produce bubbles in the coatings. You will also need: clean mixing containers, a power drill with a low speed setting and a drill mixing blade. Drop cloth and tape can be used to mask areas off around the application area, but painters tapes should never be used over the coatings as solvents in adhesives can often damage coatings.

Recommended application temperature should be close to 70 degrees F without varying much during the curing process (4-7 days). Humidity should be less than 60%. Colder temperatures can slow down and even stop the curing process. High temperatures can accelerate the pot life and curing process.

Typically the OS/W substrate conditioner is applied first (after diluting with water) and is wiped on. Once dry (typically 30-45 minutes), the CounterTek Epoxy Gen 3 should be mixed and applied according to the directions. After letting the CounterTek Epoxy Gen 3 cure for 8-24 hours, the CounterTek 2K Pro 2 Urethane is the final component you will apply. Please download the application packet for a full outline and product instructions.

CounterTek Epoxy Gen 3 is only available in Gloss, there is no alternative. When topcoating with CounterTek 2K Pro 2 Urethane, the final finish of the surface is determined by the finish of the CounterTek 2K Pro 2 Urethane. During purchasing, selecting a finish will designate which version of the StoneLok 2K2 topcoat you will receive in your kit. CounterTek 2K Pro 2 Urethane is available in Gloss (high gloss finish), Low Gloss (semi gloss finish), and Extra Low Gloss (satin finish).

We recommend that the surface is fully cured and dry (no trapped moisture), clean and free of contaminants, and that the surface profile is at least as rough as a 200-300 grit sand or grind. Sanding or grinding typically exposes new, clean concrete that is free of contaminants. After sanding or grinding, wipe the surface with acetone or a 50/50 acetone/water solution to remove dust from sanding. Once the surface is clean, dry, and adequately rough, you may begin your application process.

Your concrete surface must be fully cured before applying the CounterTek Countertop Kit to ensure that no moisture is trapped during the coating process. Full cure times are dependent on the type of mix you are using. Please refer to the manufacturer of your mix for information on concrete curing times. Countertops generally cure much faster than floor slabs as they are thinner and can cure from all directions (approximately 2 weeks).

If you plan to use all three products, it is more affordable to purchase them in one of our square footage kits. If you do not need all three products for your application, or simply need more of only one or two of the products, we offer them separately as well. However, CounterTek 2K Pro 2 Urethane should not be applied as a stand-alone product as it typically requires a suitable primer for adhesion.

The CounterTek Kits are offered in Clear on our website, but the Epoxy Gen 3 and/or 2K Pro 2 Urethane may be tinted as well. This option is only available for customers to order over the phone as we must communicate with the manufacturing location to determine if color trials are necessary for the desired color. If color matching for the specific color has been completed previously, color trials should not be necessary and we would only charge for the cost of the dye (approximately $10 - $50 per unit for 1 Gallon of coating). If color matching trials are necessary, 1-3 are performed for $50.00 each, and cost is passed on directly to the customer with no upcharge. Please give us a call at (614)754-4777 if you would like to discuss color options for the CounterTek Countertop System.

The Epoxy Gen 3 primer is naturally color enhancing (darkened, wet look). Color enhancement will vary between substrates, typically more color enhancement is visible as porosity increases (more porous = more color enhancement). For less color enhancement, CounterTek 6 (formerly TK6 NanoCoat) can also be used as a suitable primer for the CounterTek 2K Pro 2 Urethane. The final coating used will always provide the finish that is visible - and CounterTek 2K Pro 2 Urethane is available in three different finishes - Gloss, Low Gloss (semi-gloss), and Extra Low Gloss (satin)

CounterTek Kits have a one year shelf life when unopened and properly stored without freezing. After opening, shelf life is diminished and kits should be used within one month. A dry gas blanket may extend shelf life after opening.

CounterTek Kits are UV stable and great for outdoor use when shaded, but generally are not applied outdoor as the application constraints are hard to maintain for the full curing period (4-7 days). If applying outdoor, temperature and humidity must be controlled, and the coatings must be protected from damage for the entire curing process.

CounterTek Epoxy Gen 3 and CounterTek 2K Pro 2 Urethane have the highest abrasion resistances available for their respective categories (epoxy, urethane, etc.). With normal use and proper care, the CounterTek System will typically last many years. In addition, a refresh coat can be applied at any time. A light sand with 200-300 grit provides great mechanical bond for the adhesion of another topical coating.

If mixed and allowed to solidify completely, products can be disposed of normally. Please refer to your local authority to ensure accordance with local, state, and federal laws.