Fact Sheet
Overview Reviews

Try our Dealer Locator and
pick up your order nearby

Industra-Coat Epoxy & Urethane Complete Kit-Satin/Matte

Industra-Coat Epoxy & Urethane Complete Kit-Satin/Matte

Coverage: Complete commercial quality floor coating system – satin finish.

0 Review | Be the first to review this product


Available In:

* Required Fields

Fact Sheet

Kits Contents:
- Industra-Coat 3015 (Parts A & B)
- Industra-Coat 3520 urethane (Parts A and B)
Industra-Coat #3015 is a two component water based epoxy coating that exhibits excellent characteristics that rival solvent based products. #3015 has superb chemical resistance, abrasion resistance, and substrate penetration.
- Industra-Coat #3520 is two component low-gloss aliphatic polyurethane water based floor sealer that exhibits excellent characteristics for abrasion resistance, chemical resistance, flexibility, weathering, and UV stability.

Product Mixing: These products come pre-packaged by weight. Kits should be mixed in their entirety. If partial kits are to be used, refer to the technical data sheets for proper weight mix ratios. Please note that epoxy and urethane mix ratios are not equal. After the two parts are combined, mix well with slow speed mixing equipment such as a jiffy mixer until the material is thoroughly mixed and streak free. These products are emulsion products and should be mixed well before using.

Product Application: The mixed material can be applied by brush or roller. Maintain temperatures within the recommended ranges during the application and curing process. Properly prime the substrate. It is best to maintain a wet edge to avoid roller marks. Direct sunlight or high temperatures may cause visible roller marking during application. Too thick of an application may result in solvent entrapment and product failure.


0 Reviews

  • 5
  • 4
  • 3
  • 2
  • 1
There are no product reviews yet.