within 24 hours
Recommended for concrete floors and counter tops, auto service centers, warehouses, computer rooms, laboratories, aircraft hangers, cafeterias and chemical exposure areas.
CURE SCHEDULE (70°F):
pot life (150 gram mass) | Minimum 1 hour |
tack free (dry to touch) | 7-9 hours |
recoat or topcoat | 8-12 hours |
light foot traffic | 24 hours |
full cure (heavy traffic) | 3-5 days |
APPLICATION TEMPERATURE: 60-90 degrees F with relative humidity between 50% and 90%.
MIX RATIO: 2 parts A to 1 part B by volume
SHELF LIFE: 90 days in unopened containers
FINISH CHARACTERISTICS: low-gloss (<20 at 60 degrees @ glossmeter)
IMPACT RESISTANCE: Gardner Impact, direct & reverse=160 in lb (passed)
ABRASION RESISTANCE: Taber abrasor CS-17 calibrase wheel with 1000 gram total load and 500 cycles= 23.0 mg loss
ADHESION: >300 psi @ elcometer (concrete failure, no delamination) over suitable primer
VISCOSITY: Mixed= 450-650 cps (typical)
FLEXIBILITY: No cracks on a 1/8” mandrel
Fact Sheet
350-500 square feet per gallon when applied at 3-5 mils wet film thickness
1.5 Gal Kit: ~525-750 square feet
3 Gal Kit: ~1050-1500 square feet
15 Gal Kit: ~5250-7500 square feet