EXPERT TECHNICAL ADVICE:
Compare
Products
remove all

Add Another Item

Add Another Item

Add Another Item

Broom Finished Concrete Sealer

Broom finish concrete is the predominant building material for high priority exterior horizontal surfaces such as roads, bridge decks, parking decks, driveways and sidewalks.  But, even the best concrete is vulnerable to scaling if it becomes saturated during harsh winter weather (Concrete Technology Forum 2009). The same products used by Honda, NASA, the Ohio DOT and the Indiana DOT can also protect your broom finish concrete.  There are two main categories of driveway sealers – penetrating sealers and topical coatings (more information below).

Broom Finished Concrete Sealer Basics
Penetrating Sealers soak into porous concrete and masonry and create a permanent chemical reaction.  They offer a flat appearance and protection that will only wear away if the substrate itself wears away below the level of sealer penetration.  Penetrating sealers require porous masonry to be effective.  All V-SEAL penetrating sealers will permanently bond within porous concrete and masonry to strengthen the surface, repel water (ice), oil, salt, and mold and form a moisture resistant barrier that helps prevent surface defects such as chipping, scaling, spalling and cracking, increase stain resistance and ease of cleaning, and block efflorescence with a flat appearance that does not affect traction and is breathable.  Application is with pump sprayer or roller.

Topical Coatings are applied on top of concrete and masonry and can offer protection with color enhancement and wet look or gloss finish.  In addition to the topical coatings listed below we offer topical coatings in gloss or matte finish, clear, translucent color, opaque color and with enhanced capabilities to resist oil, grease, gasoline, salt, urine and other harsh contaminants.

Penetrating Sealers

V-SEAL 102 – Penetrating Sealer for Broom Finished Concrete

102 contains the same cross-linking chemistry of V-SEAL 101 with additives for superior salt, ice and harsh winter protection. V-SEAL 102 can also be tinted (please contact us for color selections and prices). Larger molecular structure makes 102 best suited for broom finished concrete and rough masonry, for most other finishes - see V-SEAL 101.

Phase II - Penetrating Sealer Enhancer

Phase II - Penetrating Sealer Enhancer

Phase II synergistically bonds with the ingredients in V-SEAL 101, 102. This secondary step is the only way to improve upon V-SEAL and is ideal for re-sealing surfaces previously sealed with V-SEAL 101 or 102.

Topical Coatings

Industra-Gloss SB Solvent Based 30% Solids Pure Acrylic Sealer

Beautiful color enhancement, wet look, and protection for decorative concrete, exposed aggregate and other masonry. > 700 VOC not available in all states. Also available brown tone for expose aggregate and other colors please contact us.

Industra-Gloss SB LVOC Low VOC Solvent Based 25% Solids Pure Acrylic Sealer

Beautiful color enhancement, wet look, and protective sealer for decorative concrete, exposed aggregate and other masonry. >400 VOC available in all states. Also available brown tone for expose aggregate and other colors please contact us.

Industra-Gloss WB - Water Based 30% Solids Acrylic Sealer

Industra-Gloss WB - Water Based 30% Solids Acrylic Sealer

Moderate color enhancement, wet look and protective sealer for decorative concrete, exposed aggregate and other masonry. Also available in colors - please contact us.

In addition to the popular concrete driveway sealers listed above we also offer many specialty sealers.  Please contact us to learn about our long list specialty driveway products. 

Shop Products By:

5 Item(s)

per page

Grid  List 

Set Descending Direction
The products found on our website represent a small, best-selling subset of what we offer. If you cannot find the product that you are looking for, give us a call to learn about our full product offering. 877-738-7325