Commercial

When Advanced Turf Solutions decided to expand their showroom floor, they were looking for a durable yet affordable floor coating system that would provide a finished  appearance. They contacted V-SEAL® for our expertise with commercial D.I.Y. floor sealer applications. We knew the floor system applied would have to stand up to forklift traffic and resist damage from harsh chemicals in fertilizers and lawn care products, so we recommended our Industra-Coat Epoxy and Urethane Kits. Advanced Turf Solutions chose an opaque epoxy primer (Industra-Coat 3015) to cover up the old unfinished concrete. While the epoxy was still wet, they broadcasted paint chips provided by V-SEAL® to hide dirt and dust between cleaning. After waiting 8-24 hours for the epoxy to cure to the touch, our clear Industra-Coat 3322 Low VOC two-part urethane gloss topcoat was applied as the final step.

Urethane topcoats provide approximately 2X the abrasion resistance of epoxy coatings and also increase UV and heat resistance for a longer wear life before re-application is necessary. All coatings can make concrete more slippery when wet, so on applications that could become wet, we recommend using 1-2 pints of anti-slip additive per Gallon of urethane topcoat. Anti-Skid can be broadcast or mixed into the coating before rolling. Urethane topcoats like our Industra-Coat 3322 are typically dry to the touch in 4-8 hours, ready for light foot traffic in 12-24 hours, and fully cured in 3-5 days under normal conditions (70 degrees F, low relative humidity).

V-SEAL® offers over 1000 products for curing, sealing, and cleaning concrete and masonry projects. A subset of our best selling products are available on our website, but for a truly customized system it is best to talk to one of our experienced technical advisors:

V-SEAL® Concrete Sealers, 9042 Cotter St., Lewis Center, Ohio, 43035

614-754-4777

 info@vseal.com, www.vseal.com .

American educational institutions spend millions of dollars annually on valuable infrastructure such as sidewalks, parking lots, statues, fountains, and buildings.  Often years of research and planning are involved to construct these multi-million-dollar investments.  The most astute institutions also research the best ways to protect their infrastructure, which is why they contact V-SEAL® Concrete Sealers for knowledgeable technical support and superior concrete sealer products.

Cornell University Parking

When the engineers at Cornell University wanted to replace parking surfaces late in the season, their traditional method - water curing, waiting 28 days, and sealing with long-term penetrating sealer - was not going to work due to timing.  They chose V-SEAL® 102 Winter-Guard®, the world’s only true SEAL + CURE®.  V-SEAL® 102 Winter-Guard® is a powerful long-term sealer tested to resist more than 1000 freeze/thaw cycles (10 years in midwestern climates) that passes ASTM C309, allowing it to be applied as soon as new concrete can withstand the weight of a worker without marring.  The photos below illustrate nearly perfect surfaces one year later.

Elon University Grand Fountain Restoration

A major project at Elon University was the restoration of the high profile Grand Fountain, so they contacted V-SEAL®.  After consultation to understand their needs, V-SEAL® provided the Industra-Coat Epoxy and Urethane System, which consists of epoxy primer for superior adhesion and water repellence, and urethane topcoat for abrasion and UV resistance.  Industra-Coat Epoxy and Urethane Systems are widely utilized as an attractive long-lasting coating system for fountains, ponds, swimming pools, and commercial and industrial floors.

University of Houston Concrete Floors

The University of Houston wanted to upgrade the appearance of the densified concrete floors in their new $47 Million dormitory.  Originally, the floors appeared blotchy and dull.  The architect for the project contacted V-SEAL® to obtain a custom color, fast drying, commercial grade floor sealer system that could be applied by non-specialized applicators to conceal the discolored areas and provide the intended appearance of polished concrete with excellent abrasion resistance and chemical resistance.  V-SEAL® provided a high-performance copolymer in a custom blended colored primer coat and a clear topcoat.

Bowling Green High School Memorial Statue

When the City of Bowling Green, Ohio wanted to protect a new memorial statue placed at the entrance of the local high school, they contacted V-SEAL for a graffiti repellent, non-slip sealer system.  All surfaces were initially treated with V-SEAL® 101 Multi-Surface, a long-lasting penetrating sealer for concrete, brick, stone, stucco, and other masonry.  To fortify graffiti repellence, all surfaces were coated with NanoCoat and horizontal surfaces were coated with NanoCoat with anti-skid grit.

Other educational institutions that have relied upon V-SEAL® for important projects include Harvard, Penn, Duke, Maryland, Cal Poly, Stanford, UC Berkley, Oklahoma, Clemson, Auburn, Illinois, Otterbein, Jefferson, Western Kentucky, Texas Women’s, High Point, Ohio University, and the Ohio State University.

For informative technical support and superior products for institutional concrete investments contact:

V-SEAL® Concrete Sealers, 9042 Cotter St., Lewis Center, Ohio, 43035 614-754-4777, info@vseal.com, www.vseal.com .

When it comes to high-quality products & expert support, V-SEAL has led the way since 1988

Continue reading →