V-SEAL Home
Testimonials
Place an Order
Products
Concrete Sealers
Specialty Coatings
Concrete Cleaners
About V-SEAL
Contact V-SEAL
Educational Tips
V-Seal Concrete Sealer

Home | Testimonials | Place An Order | About V-Seal | Contact Us
Concrete Sealers | Specialty Coatings | Concrete Cleaners | Tips | Surface Defects


EASY EFFLORESCENCE REMOVER
EFFLORESCENCE CLEANER SPECIFICATIONS
AND DATA SHEET

Does Your Area Look Like This?
It Can Look Like This!
Before Efflorescence Is Cleaned
After Efflorescence Was Cleaned

 

1. PRODUCT NAME:
V-SEAL EASY EFFLORESCENCE REMOVER

2. PRODUCT DESCRIPTION:

V-SEAL EASY Efflorescence Remover is a newly developed product that replaces conventional mineral and organic acids for the removal of efflorescence. V-SEAL EASY EFFLORESCENCE REMOVER is a non-fuming, phosphate-free product that is a lot more effective than other acids when dissolving efflorescence salts and has none of the hazards that are inherent with commonly used acids. V-SEAL EASY EFFLORESCENCE REMOVER contains a special surfactant that provides detergency properties that will also help in the removal of oil/grease stains. V-SEAL EASY EFFLORESCENCE REMOVER does not contain any hydrofluoric acid, bleach, abrasives, caustic, mineral acids or petroleum distillates. It is formulated as a ready-to-use product.

3. TECHNICAL DATA:
Appearance: Amber Liquid
Odor: Mild
pH: 1.0
lbs/gallon: 9.5 to 10

4. GENERAL APPLICATION:

TEST AREA: For best results test a solution of V-SEAL EASY Efflorescence remover before general use. Protect polished and painted surfaces. Keep away from plants and vegetation. Use V-SEAL EASY EFFLORESCENCE REMOVER to clean stubborn efflorescence from brick, block, stucco and other similar type surfaces. Use full strength, do not dilute. Apply solution onto a dry surface from the bottom up. Let solution stand for 10-20 minutes, depending on surface and contaminates, agitate and rinse thoroughly or power wash. For surfaces being sealed, neutralize with a mild solution of ¼ cup of non-sudsing ammonia to 1 gallon of water. Apply water/ammonia mixture, let dwell or scrub lightly with bristle brush or broom. Allow at least 10 minutes of dwell time. Then rinse away mixture completely.

5. HEALTH AND SAFETY: For specific information please refer to the Material Safety Data Sheet. Wear chemical resistant gloves, apron, footwear and goggles. Product Label has more information as well.


6. WARRANTY:
The TARA Group / V-Seal warrants all its products to be free from defects, and makes no other warranties with respect to its products, express or implied, including without limitation the implied warranties of MERCHANTABILITY OF FITNESS FOR PARTICULAR PURPOSE. The TARA Group / V-Seal liability shall be limited in all events to supplying sufficient products to re-treat the specific areas to which defective product has been applied. The TARA Group / V-Seal shall have no other liability, including liability for incidental, consequential or resultant damages whether due to breach of warranty or negligence. This warranty may not be modified or extended by representatives of The TARA Group / V-Seal or its distributors.

7. TECHNICAL SERVICES:
The TARA Group / V-Seal employs a complete staff of customer service representatives for response to any questions from end users and contractors. We also employ a staff of trained sales and field customer service personnel for on-site testing and application assistance. Please contact us for any assistance required...